oled: add support for SPI ssd130x displays

For I2C displays, the bus_type needs to be added:

+   .bus_type = SSD130x_BUS_I2C,
    .address = DISPLAY_ADDR,
    .bus_num = I2C0,

To use a SPI display:

1/ add the SSP include:

    #include "drivers/ssp.h"

2/ add the SPI pins to the init table:

    /* SPI : Display */
    { LPC_SSP0_SCLK_PIO_0_14, LPC_IO_DIGITAL },
    { LPC_SSP0_MISO_PIO_0_16, LPC_IO_DIGITAL },
    { LPC_SSP0_MOSI_PIO_0_17, LPC_IO_DIGITAL },

3/ update the oled_display conf:

    .bus_type = SSD130x_BUS_SPI,
    .bus_num = SSP_BUS_0,
    .gpio_dc = LPC_GPIO_0_0,
    .gpio_cs = LPC_GPIO_1_0,
    .gpio_rst = LPC_GPIO_0_31,

4/ initialize the SPI bus:

    ssp_master_on(SSP_BUS_0, LPC_SSP_FRAME_SPI, 8, 8*1000*1000);

diff --git a/oled/main.c b/oled/main.c
index c7debef..99da7c2 100644 (file)
--- a/oled/main.c
+++ b/oled/main.c
@@ -101,6 +101,7 @@ void fault_info(const char* name, uint32_t len)
 #define DISPLAY_ADDR   0x78
 static uint8_t gddram[ 4 + GDDRAM_SIZE ];
 struct oled_display display = {
+       .bus_type = SSD130x_BUS_I2C,
        .address = DISPLAY_ADDR,
        .bus_num = I2C0,
        .charge_pump = SSD130x_EXT_VCC,  /* Alt is SSD130x_INTERNAL_PUMP */