Moved the eeprom select used when SPI driver is not present to the eeprom code.

diff --git a/drivers/eeprom.c b/drivers/eeprom.c
index 027d0d8..3a95ee3 100644 (file)
--- a/drivers/eeprom.c
+++ b/drivers/eeprom.c
@@ -27,6 +27,32 @@
 #include "core/system.h"
 #include "lib/string.h"
 #include "drivers/i2c.h"
+#include "drivers/gpio.h"
+
+
+/***************************************************************************** */
+/*       EEPROM Chip select for the GPIO Demo module                           */
+/*******************************************************************************/
+/* These are place-holders to set the SPI chip select low if the SPI driver is not used.
+ * These dummy functions will be over-ridden by SPI ones if the SPI driver is used.
+ */
+#define I2C_CS_PIN 15
+void I2C_CS_Default_Set(void)
+{
+    struct lpc_gpio* gpio0 = LPC_GPIO_0;
+    config_gpio(0, I2C_CS_PIN, (LPC_IO_FUNC_ALT(0) | LPC_IO_MODE_PULL_UP | LPC_IO_DIGITAL));
+    /* Configure SPI_CS as output and set it low. */
+    gpio0->data_dir |= (1 << I2C_CS_PIN);
+    gpio0->clear = (1 << I2C_CS_PIN);
+}
+void I2C_CS_Default_Release(void)
+{
+       struct lpc_gpio* gpio0 = LPC_GPIO_0;
+    gpio0->set = (1 << I2C_CS_PIN);
+}
+
+void spi_cs_pull_low(void) __attribute__ ((weak, alias ("I2C_CS_Default_Set")));
+void spi_cs_release(void) __attribute__ ((weak, alias ("I2C_CS_Default_Release")));
 
 
 /***************************************************************************** */
@@ -46,6 +72,7 @@
 #define EEPROM_ID_BIG_PAGE_SIZE 64
 
 
+
 /* Detect the eeprom size */
 int eeprom_detect(void)
 {
@@ -108,7 +135,10 @@ int eeprom_read(uint32_t offset, void *buf, size_t count)
        int ret = 0;
        char cmd_buf[CMD_BUF_SIZE] = { EEPROM_ID_BIG_ADDR, 0, 0, (EEPROM_ID_BIG_ADDR | 0x01), };
        char ctrl_buf[CMD_BUF_SIZE] = { I2C_CONT, I2C_CONT, I2C_DO_REPEATED_START, I2C_CONT, };
-       int eeprom_type = get_eeprom_type();
+       int eeprom_type = 0;
+
+       spi_cs_pull_low();
+       eeprom_type = get_eeprom_type();
 
        /* Read the requested data */
        switch (eeprom_type) {
@@ -127,6 +157,7 @@ int eeprom_read(uint32_t offset, void *buf, size_t count)
                        ret = -1;
                        break;
        }
+       spi_cs_release();
 
        return ret;
 }
@@ -157,7 +188,10 @@ int eeprom_write(uint32_t offset, const void *buf, size_t count)
        int write_count = 0, size = 0;
        char cmd[MAX_CMD_SIZE] = { EEPROM_ID_BIG_ADDR, 0, 0 };
        char full_buff[(EEPROM_ID_MAX_PAGE_SIZE + MAX_CMD_SIZE)];
-       int eeprom_type = get_eeprom_type();
+       int eeprom_type = 0;
+
+       spi_cs_pull_low();
+       eeprom_type = get_eeprom_type();
 
        switch (eeprom_type) {
                case EEPROM_TYPE_SMALL:
@@ -209,6 +243,7 @@ int eeprom_write(uint32_t offset, const void *buf, size_t count)
 
                write_count += size;
        }
+       spi_cs_release();
 
        if (write_count != count)
                return ret;