Make use of the pio and gpio config functions - status_led part

diff --git a/extdrv/status_led.c b/extdrv/status_led.c
index 9b624f9..1e1c28f 100644 (file)
--- a/extdrv/status_led.c
+++ b/extdrv/status_led.c
@@ -27,6 +27,7 @@
 #include "core/lpc_regs_12xx.h"
 #include "core/system.h"
 #include "core/pio.h"
+#include "drivers/gpio.h"
 #include "extdrv/status_led.h"
 
 
@@ -51,18 +52,12 @@
 
 void status_led_config(void)
 {
-       struct lpc_gpio* gpio1 = LPC_GPIO_REGS(1);
-       uint32_t mode = (LPC_IO_MODE_PULL_UP | LPC_IO_DIGITAL | LPC_IO_DRIVE_HIGHCURENT);
-       struct pio red_led = LPC_GPIO_1_5;
-       struct pio green_led = LPC_GPIO_1_4;
-       /* Status Led GPIO */
-       config_pio(&green_led, mode);
-       config_pio(&red_led, mode);
-       /* Configure both as output */
-       gpio1->data_dir |= (1 << LED_GREEN) | (1 << LED_RED);
-       /* Turn both LEDs on */
-       //gpio1->set = (1 << LED_GREEN) | (1 << LED_RED);
-       gpio1->set = (1 << LED_GREEN);
+       uint32_t mode = LPC_IO_MODE_PULL_UP | LPC_IO_DRIVE_HIGHCURENT;
+       const struct pio red_led = LPC_GPIO_1_5;
+       const struct pio green_led = LPC_GPIO_1_4;
+       /* Status Led GPIO. Turn Green on. */
+       config_gpio(&green_led, mode, GPIO_DIR_OUT, 1);
+       config_gpio(&red_led, mode, GPIO_DIR_OUT, 0);
 }
 
 void status_led(uint32_t val)