Updated Comments Updated according to new header files Updated use of uprintf and...

diff --git a/gpio_intr/main.c b/gpio_intr/main.c
index f404271..766a67f 100644 (file)
--- a/gpio_intr/main.c
+++ b/gpio_intr/main.c
@@ -1,5 +1,5 @@
 /****************************************************************************
- *   apps/gpio_intr/main.c
+ *   apps/dev/gpio_intr/main.c
  *
  * GPIO interrupt example
  *
@@ -23,12 +23,9 @@
 
 /* ISP button release disables the chenillard for 5 seconds */
 
-#include <stdint.h>
-#include "core/lpc_regs_12xx.h"
-#include "core/lpc_core_cm0.h"
-#include "core/pio.h"
 #include "core/system.h"
 #include "core/systick.h"
+#include "core/pio.h"
 #include "lib/stdio.h"
 #include "drivers/serial.h"
 #include "drivers/gpio.h"
@@ -65,10 +62,7 @@ void system_init()
 {
        /* Stop the watchdog */
        startup_watchdog_disable(); /* Do it right now, before it gets a chance to break in */
-
-       /* Note: Brown-Out detection must be powered to operate the ADC. adc_on() will power
-        *  it back on if called after system_init() */
-       system_brown_out_detection_config(0);
+       system_brown_out_detection_config(0); /* No ADC used */
        system_set_default_power_state();
        clock_config(SELECTED_FREQ);
        set_pins(common_pins);
@@ -87,10 +81,7 @@ void system_init()
  */
 void fault_info(const char* name, uint32_t len)
 {
-       serial_write(0, name, len);
-       /* Wait for end of Tx */
-       serial_flush(0);
-       /* FIXME : Perform soft reset of the micro-controller ! */
+       uprintf(UART0, name);
        while (1);
 }
 
@@ -102,9 +93,10 @@ void activate_chenillard(uint32_t gpio) {
 
 
 /***************************************************************************** */
-int main(void) {
+int main(void)
+{
        system_init();
-       uart_on(0, 115200, NULL);
+       uart_on(UART0, 115200, NULL);
 
        /* Activate the chenillard on Rising edge (button release) */
        set_gpio_callback(activate_chenillard, &button, EDGE_RISING);