Fix : it's the port numbers, not the pin numbers.

diff --git a/include/drivers/timers.h b/include/drivers/timers.h
index 48163a6..c2efe94 100644 (file)
--- a/include/drivers/timers.h
+++ b/include/drivers/timers.h
@@ -100,38 +100,38 @@ int timer_setup(uint32_t timer_num, struct timer_config* conf);
  *   port 2 are 2 and 3 instead of 3 and 4 !
  */
 /* 16 bits timer 0 match / capture pins */
-#define LPC_TIMER_16B0_CHANNEL_0_PIN_28  28
-#define LPC_TIMER_16B0_CHANNEL_1_PIN_29  29
-#define LPC_TIMER_16B0_CHANNEL_0_PIN_11  11
-#define LPC_TIMER_16B0_CHANNEL_1_PIN_12  12
+#define LPC_TIMER_16B0_CHANNEL_0_PIO_28  28
+#define LPC_TIMER_16B0_CHANNEL_1_PIO_29  29
+#define LPC_TIMER_16B0_CHANNEL_0_PIO_11  11
+#define LPC_TIMER_16B0_CHANNEL_1_PIO_12  12
 /* Alternate on PIO2_0 and PIO2_1 */
 
 /* 16 bits timer 1 match / capture pins */
-#define LPC_TIMER_16B1_CHANNEL_0_PIN_15  15
-#define LPC_TIMER_16B1_CHANNEL_1_PIN_16  16
+#define LPC_TIMER_16B1_CHANNEL_0_PIO_15  15
+#define LPC_TIMER_16B1_CHANNEL_1_PIO_16  16
 /* Alternate on PIO1_5 and PIO1_6 */
 /* Alternate on PIO2_2 and PIO2_3 */
 
 /* 32 bits timer 0 match / capture pins */
-#define LPC_TIMER_32B0_CHANNEL_0_PIN_1   1
-#define LPC_TIMER_32B0_CHANNEL_1_PIN_2   2
-#define LPC_TIMER_32B0_CHANNEL_2_PIN_3   3
-#define LPC_TIMER_32B0_CHANNEL_3_PIN_4   4
-#define LPC_TIMER_32B0_CHANNEL_0_PIN_18  18
-#define LPC_TIMER_32B0_CHANNEL_1_PIN_19  19
-#define LPC_TIMER_32B0_CHANNEL_2_PIN_20  20
-#define LPC_TIMER_32B0_CHANNEL_3_PIN_21  21
+#define LPC_TIMER_32B0_CHANNEL_0_PIO_1   1
+#define LPC_TIMER_32B0_CHANNEL_1_PIO_2   2
+#define LPC_TIMER_32B0_CHANNEL_2_PIO_3   3
+#define LPC_TIMER_32B0_CHANNEL_3_PIO_4   4
+#define LPC_TIMER_32B0_CHANNEL_0_PIO_18  18
+#define LPC_TIMER_32B0_CHANNEL_1_PIO_19  19
+#define LPC_TIMER_32B0_CHANNEL_2_PIO_20  20
+#define LPC_TIMER_32B0_CHANNEL_3_PIO_21  21
 /* Alternate on PIO2_4 to PIO2_7 */
 
 /* 32 bits timer 1 match / capture pins */
-#define LPC_TIMER_32B1_CHANNEL_0_PIN_6   6
-#define LPC_TIMER_32B1_CHANNEL_1_PIN_7   7
-#define LPC_TIMER_32B1_CHANNEL_2_PIN_8   8
-#define LPC_TIMER_32B1_CHANNEL_3_PIN_9   9
-#define LPC_TIMER_32B1_CHANNEL_0_PIN_23  23
-#define LPC_TIMER_32B1_CHANNEL_1_PIN_24  24
-#define LPC_TIMER_32B1_CHANNEL_2_PIN_25  25
-#define LPC_TIMER_32B1_CHANNEL_3_PIN_26  26
+#define LPC_TIMER_32B1_CHANNEL_0_PIO_6   6
+#define LPC_TIMER_32B1_CHANNEL_1_PIO_7   7
+#define LPC_TIMER_32B1_CHANNEL_2_PIO_8   8
+#define LPC_TIMER_32B1_CHANNEL_3_PIO_9   9
+#define LPC_TIMER_32B1_CHANNEL_0_PIO_23  23
+#define LPC_TIMER_32B1_CHANNEL_1_PIO_24  24
+#define LPC_TIMER_32B1_CHANNEL_2_PIO_25  25
+#define LPC_TIMER_32B1_CHANNEL_3_PIO_26  26
 /* Alternate on PIO2_8 to PIO2_11 */
 
 /* Capture or match alternate function select for port 0 pins */
@@ -141,7 +141,7 @@ int timer_setup(uint32_t timer_num, struct timer_config* conf);
 
 /* Setup one pin to use as match or capture pin
  * This configure function can be used only for pins on port 0.
- * Use LPC_TIMER_*B*_CHANNEL_*_PIN_* definitions for the pin number and either
+ * Use LPC_TIMER_*B*_CHANNEL_*_PIO_* definitions for the pin number and either
  *   LPC_TIMER_PIN_FUNC_CAPTURE or LPC_TIMER_PIN_FUNC_MATCH for the function.
  * Note: These pins are not setup using the usual system set default pins functions
  *   as most functions may be affected to many different pins, and the use of the