From: Nathael Pajani Date: Sun, 5 Feb 2023 02:42:24 +0000 (+0100) Subject: Update "simple" example readme X-Git-Url: http://git.techno-innov.fr/?a=commitdiff_plain;h=c5ecb4eb1b2a61d14d7b498b21632c5f06447534;p=soft%2Flpc122x%2Frfsub1GHz Update "simple" example readme --- diff --git a/simple/README b/simple/README index f956ddf..9509b2a 100644 --- a/simple/README +++ b/simple/README @@ -21,8 +21,22 @@ Copyright 2013 Nathael Pajani This module uses the CC1101 transceiver to provide Sub 1GHz Rf connectivity. -The module also integrates a TMP101 temparature sensor, the usual bi-color led -used for status, a RTC quartz, a DC-DC step-up for button battery power source -support, and an extension port with a set of gpio, including ADC (2), PWM (2), -I2C and SWD debug port. +Depending on the version, the Sub 1GHz module integrates a TMP101 temparature + sensor, a bi-color led used for status, a RTC quartz, a DC-DC step-up for + button battery power source support, and an extension port with a set of gpio, + including UARTs, ADC, PWM, I2C, SPI, and SWD debug port. +Refer to the README shipped with the electronics sources or to the RF-Sub1GHz + module's reference manual for more information. + +This application relies on a module version which includes a TMP101 sensor, or + has one connected to the I2C bus (with I2C address 0x94 (Pin Addr0 (pin5 of + tmp101) connected to VCC) + +The application is waiting for data, either from UART0 or from RF. +Data received on UART0 is sent over RF when a new-line character is received + (and line is less than 64 bytes). +Data received from RF triggers temperature or voltage reading and display if + first character (data[2]) is either 'T' or 'V', or nothing in all other cases. +If compiled with DEBUG set to 1 (default), additionnal inforamtion about + transmission or reception is displayed.